|Help-Section - FAQ|
If you cannot find the answer to your question here, feel free to contact one of the Aces High Trainers in our Help and Training Forum or ask online as there are usually many players that will be glad to help you. You may also contact HiTech Creations through the following email addresses:
Phone Number: 817-431-8840
How much is the subscription to Aces High?
Your account with Aces High is always free and we never ask for any billing information until you use your two week free trial. After you complete your two week trial (one per customer), the game then prompts you as to whether you want to subscribe or not. The subscription is $14.95 U.S. per month (Texas residents add 7.25% sales tax).
What are the countries?
Aces High has three countries that you can fly for: the Bishops, the Knights, and the Rooks. They are named after pieces in the game of chess. Bishops are tall and have a diagonal opening in the faceplates of their armor. Knights have a horse's head. Rooks look like a castle battlement.
How do I change countries?
You can change countries by clicking O'Club->Change Country on the clipboard menu. Select the country you want to change to and you will be moved to an available field owned by your new country. Another way to change countries is to use the ".country X" dot command, where X is 1 for Bishops, 2 for Knights, and 3 for Rooks. Currently, when players change countries they must stay in their new country for twelve hours before being allowed to change countries again. How do I change Fields?
You can change fields by double clicking on the field number on the map. You may only move to fields owned by your country. Another way to change fields is to use the ".move X" dot command where X is the field number you wish to move to.
How do I get out of a plane?
The command or facility to exit your plane depends on a couple of factors. If the arena is set to not allow you to exit while the plane is in motion, you have to bail by either pressing the
What is convergence and how do I set it?
Convergence is the range at which the stream of bullets from your wing guns meet to form the smallest grouping possible, putting the maximum amount of ammo on a target. Some bullets cause more damage close in than further way, due to the bullet slowing down and losing punch or kinetic energy. If all of your guns fired parallel to each other, the bullets would spread evenly over the target plane and cause a small amount of damage. If all of the bullets converge on one point on the enemy plane then it causes catastrophic damage at that one point. Without convergence, hitting a wing on an enemy would mean half of the bullets don't impact and those that do make a few holes in the wing and bounce off the metal spars or fuel tank. With convergence, all of the rounds would strike the wing at the same point and several would punch through the wing spar causing it to break and the wing will fall off or bend backward. At the very least, there will be a gaping hole in the wing and a massive fuel leak. To set your convergence, first click Hangar on the clipboard menu, then click the Set Convergence button on your clipboard. You will be moved around to the rear of the aircraft, vehicle, or boat where you can click and drag on the convergence points to set them.
I'm spinning around and can't get the aircraft off the ground,what do I do?
Aces High models much of the challenge of taking off in a high performance aircraft. Basically, there are a number of forces that in a conventional aircraft (such as the P-51D) try to turn the aircraft to the left. First, we have slipstream effect. Basically, the air doesn't shoot straight back from the prop; it spirals around the aircraft, and strikes the left side of the vertical stabilizer, which pushes the tail to the right, and thus the nose to the left. Second, we have torque. We all know that torque is due to the fact that since the prop is spinning one way, a force is generated that tries to spin the aircraft as well.Â Basically, the torque rolls the aircraft left. P factor is caused by the fact that one side of the propeller produces more thrust than the other. This is because the Angle of Attack (AoA) of the prop blades is based upon their relative wind. At rest, it is equal on all blades of the prop (since the relative wind is coming from the rotation of the prop--and nothing else). With the aircraft flying straight and level, we don't really have this problem, since the wind component caused by the rotation of the prop is the same on all blades, and since the aircraft is level, the airspeed of the aircraft is going to have the same effect on all of the blades equally. But, if the AIRCRAFT is at a high AOA, one side of the prop circle is ascending, and one is descending. The problem is, we have airspeed. So, the descending blade takes a bigger bite of the air than the other blade(s). Care to guess which one takes the bigger bite?
The one on the right, which yaws the aircraft...LEFT. The last one (which is a big deal in AH) is gyroscopic precession. We all know (or should know) that a force exerted on a gyro will come out 90 degrees in the direction of rotation later. So, what this means for an aircraft is this: when we push the nose down (when we lift the tail), we are exerting a force on the top of the prop disk, which pushed FORWARD. OK, 90 degrees later (since the prop spins clockwise viewed from the pilot's seat) we get that force back. 90 degrees later is...on the right. Which again yaws the aircraft LEFT.
So now that we've got the forces down, how do we take off?
Well, here's a generic procedure: Start engine, use 20 degrees of flaps. Advance engine to 55 InHg MAP (use 45 if you still have problems). Use rudders to track as straight as you can (more on this later). Hold the stick forward. As nose lowers, counter the left yaw--this is a big one too, if you are holding full right rudder while the nose moves, lower the nose slower. As you are level, and at 100 knots, add more power. Key things to remember- -Don't add full power right away. -Don't add full power while you are lowering the nose (this is about the worst thing you can do). -Track straight--here's an easy way how: follow your Directional Gyro. It's possible to take off in a real aircraft with NO visual reference if you have to by sole reference to the directional gyro, and the same is true for Aces High. If the runway heading moves left (at all), press the left rudder. If it goes right, press the right rudder. You will notice these changes much faster than if you were looking at the runway trying to perceive the changes in heading. And, since most of the AH fields are on cardinal headings, and the DG turns the "right" way, this is real easy, and takeoffs are easy to keep on the runway with this method.
I've lost my clipboard. How do I get it back?
Press the ESC key on your keyboard. It is possible to minimize the clipboard and then change your views so the clipboard disappears from view. Pressing the ESC key toggles the clipboard between being minimized and maximized. If you still can't see the clipboard then try a different view, (F1-F5), and press ESC again then resize the clipboard with the plus and minus buttons on the top right of the clipboard. How do I move around on the field? The menu options on the bottom of the clipboard move you to the different field locations. These options change depending on whether you are on the field or in flight. The small square buttons on the left are the hangar and spawn point locations for your field. Clicking one of these buttons puts you on the runway or spawn point in your currently selected plane, vehicle or boat with your previously selected ordnance and fuel load. The Tower option moves you to the Control Tower if you are in another field location such as the Hangar or O'Club. Clicking the Ships option will bring up the interface for Player Controlled Task Groups. The O'Club option moves you to the O'Club where you can change countries, change your game id or set up a squad. The Hangar option moves you to the hangar where you can select a plane, vehicle or boat, change ordnance and fuel loads, set the convergence of your guns, or check your Perk Points. The Roster option will show you all players currently online, their country, rank and squad affiliation. The Options button shows the game setup options on the clipboard and this is where you can map the keys on your keyboard, map the buttons on your joystick and calibrate your joystick to work with Aces High. The Quit button will exit Aces High and return you to your desktop. How do I move the clipboard around on the screen?
Click and drag on the clipboard "clip" to move the clipboard to a different place on your screen. Or you can click and drag the small arrow on the upper left of the clipboard next to the clip.
How do I change the map on my clipboard?
Right click on the clipboard map and select Clipboard Maps from the menu.
How do I engage wep?
Press P on your keyboard to engage wep.
What are the flaps keys?
Press Q on your keyboard to lower flaps, W to raise flaps.
How do I start a squadron?
From the clipboard menu, select the O'Club option. To form a squad, you just have to invite one player and wait for them to accept your invitation. Squads in Aces High can have from 2 to 32 members.
What is the autopilot key?
Press X on your keyboard to toggle autopilot level, Ctrl-X to toggle autopilot angle, and Alt-X to toggle autopilot climb. When autopilot level is on, the cockpit beacon will be yellow, and autopilot angle and autopilot climb will display a red beacon. The beacon light is off if no autopilot is engaged.
How do I take a screenshot?
Press Alt-S on your keyboard to take a screen shot. The file will be saved in your [Game installation dir]/Aces High/ directory with the format ahssxx.bmp where xx is the number of the latest screen shot.
How do I use padlock?
Use F11 to toggle on the padlock view.
How do I open my parachute?
Press O on your keyboard to open your chute.
How do I change fuel tanks in mid-flight?
Press Shift-F on your keyboard to change fuel tanks.
What does the 'A' in the fuel indicator mean?
Some of the aircraft in Aces High can have multiple fuel tanks. For example, the P-51D has three internal tanks, they are labeled LW for left wing, RW for right wing and AUX is the tank in the fuselage. If you load drop tanks, you get 2 more tanks labeled "extern".
At the start of flight you will see an A- in front of the tank name. The A indicates that you are in Auto mode and the program will select your fuel tanks for you. It does this by 2 simple rules.
1. Always select external tanks first.
2. Select the tank which will keep your CG (center of gravity) balanced.
When you choose a fuel load it doesn't put 25% or 50% in every tank but loads them with a preset configuration. That's why unless you load 100%, you don't see the AUX in the P-51D. Pressing Shift-F the first time will take you out of auto mode. Note the fuel dial only shows a % in a tank, not your total fuel. Pressing Shift-F a second time will select the next non-empty tank. In the case of an aircraft with only one internal tank and assuming you don't have drop tanks loaded, Shift-F will just be going back and forth from A-MAIN to MAIN since those are the only two modes possible with one tank.
How do I drop my external fuel tanks?
Press Backspace on your keyboard to cycle to your drop tanks (DT), then press B to fire the secondary weapon, which drops the tanks in this case.
What's the difference between a Fighter and an Attack sortie?
Fighter sorties only score air-to-air damage and kills, and Attack sorties score air-to-air and air-to-ground damage and kills. Please see Scoring in Aces High for a complete explanation of the score system.
Why can't I fly the newest planes offline in Aces High?
Enable the newest planes, vehicles and boats by clicking on the Options, then Arena Setup, then Environment button on your clipboard, then click on Field Settings. Next, click the Enable All button under the Planes list, then click on the Save button.
How do I get perk points?
Perk points are accumulated by killing enemies and damaging and destroying enemy targets. Please visit the Perk Points page on our help pages to learn more about earning and spending perk points.
What do the trains and convoys do?
Trains and convoys are built into the terrain to resupply fields and towns. The trains and convoys can be damaged and destroyed to keep the destination field from being resupplied. More information about gameplay in Aces High is available on our help pages.
How do I drive the tanks/boats?
First, select a vehicle or boat from the hangar, then move to the driver's position by clicking the H button or a spawn point on your clipboard. Start the engine by pressing the E key, shift into first gear with the Q key, and push your joystick forward to move.
How do I calibrate my bomber gunsight?
Here are four basic steps to calibrating the bombsight: Enter calibration mode Measure speed by marking a point on the terrain Set the target altitude Exit calibration mode Bombers in Aces High has a detailed explanation of each step.
How do I turn off mouse view control while in flight?
Select Options->Preferences->View Options from the clipboard menu, and uncheck Default to Instant View.