How to configure your Joystick or mouse
If you prefer a video, then please visit our Youtube channel to see how to configure your joystck. Proper configuration of your joystick is a must. Taking your time here will be very beneficial to your enjoyment of the game. If you have not calibrated your joystick(s) in Windows, please do so before continuing. You will find the Windows calibration tool in the Control Panel (Start->Settings->Control Panel). It may be named Gaming Controllers, or Joysticks or something along those lines, depending on the operating system you are using.

We will start from the clipboard with you located in the tower.

The clipboard options when in the towerPress/select the Options menu item.
The Options menu list for Aces HighNow select the Controls option.
Joystick calibration menu option in Aces HighFrom the menu that pops up, select Calibrate Joystick.
Joystick calibration in Aces HighThe panel to the right will cover the upper section of the clipboard.

Do exactly what it says. Move all your wheels, rudders, and joystick through their full range of motion.

Release all the sticks back to their default positions and then press the OK button.

After you press the OK button, the panel will clear and you will see the terrain map reloaded on the clipboard. Your joystick should now be calibrated in the game.

Mouse/Joystick input controller configuration menu option in Aces HighYou now need to map any inputs which are not mapped to your joystick and/or verify its operation. For that you need to select the Map Controllers option from the menu.

Joystick and Mouse mapping controls for Aces High

Now, let's talk about the map controllers screen and all the various options shown.


Select Controller:
The Map Controllers selection will present you with a screen similar to the one below. In the upper right corner is the Select Controller drop down list. If you have more than one stick connected, press the drop down arrow to view and select the stick you wish to configure.

Select Joystick or Mouse Controller drop down list in Aces High
Mode Selection:
The drop down list directly below the Select Controller is the Mode Selection option. Here you can select which mode you want the commands to be applied to the inputs from the stick. You might use this to configure one mode for flying a plane, another mode for vehicles, and so on. By mapping the command to select which mode, you can instantly change the command mappings from one mode set to another.

If you check the "Auto select mode at start of flight", the game will switch between "Mode 1 (Planes)" and "Mode 2 (Vehicles/Boats)" automatically. You will see a text message in the radio text box indicating which mode your joystick will be using.

Select the programmiing mode for the joystick and mouse in Aces High

Default Map, Copy Mode 1, Calibrate Axis:
To the immediate top left are three buttons.

The Default Map loads and configures a basic set of command mappings. This button will only set the primary stick commands.  Any other sticks will require manual configuring.

The Copy Mode 1 button allows you to copy a command set from one mode to the currently selected mode (other than 1).

The Calibrate Axis allows you to calibrate a specific axis, wheel, slider, dial, or rudder input.

Configure deadband, damping, and other input options for joysticks in Aces High
Checking the Advanced check box will cause a panel to swing out from the clipboard showing information similar to the screen shot above. Across the top of the panel, is the name of the stick currently selected, the input currently selected from the Controller Input list, and the mode currently selected from the Mode Selection drop down list.  If you did not select a Controller Input from the list, this page will do nothing.
Reviewing the joystick or mouse configuration in Aces High

Auto select mode at start of flight:
Checking this option causes the game to switch your joystick input command mode from Mode 1 (when flying) to Mode 2 (when in a vehicle) automatically at the start of a sortie.
For this to work properly, you must map commands in both Modes 1 and 2.

The Modify button is used to change/assign a command to an input. You can also double-click, using your left mouse button, on the input and it will bring up the commands/functions you can assign to it.

Controller Input:
This is the list of input items available to program. These labels are presented exactly as the joystick gives them to the game and may not match what is physically labeled on the joystick.

Mode # Function:
The Mode # Function lists (replace # with the appropriate number based on which mode you are working with) the commands associated with each input.

The OK button is used to exit and save the changes you have made.

The Cancel button is used to discard any changes made.

Ok, so all this is neat, but how do you map a function or command to the various joystick inputs? Good question!

Select the command to map to a button, wheel, slider, throttle, or rudder, of the joystick or mouse, in Aces HighSimply use your mouse to double-click on the input from the Controller Input list you wish to map a command/function to, OR double-click the button on the stick.
The menu, shown at the right will appear.

Select the command or function (Analog Inputs) from the list, then press the OK button.

When you return to the Map Controllers panel, the new command is shown next to the input you selected to map.

Pretty neat, huh?

Repeat the mapping process for each input you wish to map in the game.

Note, in many cases the actual name of the stick input does not correlate to what you may think it should. In this example the "Slider" is for the throttle, but it could easily be a "Z-Axis" or "Z-Rotation" input as well.

To determine what axis may be assigned to the throttle, simply move the throttle to its extremes, repeatedly, and watch the number in parentheses change. The numbers are the raw input from the stick.

It is then a simple matter of assigning "Throttle 1" (from the mapping window under Analog Inputs) to the selected input of the joystick.


When you are done mapping, simply press the OK button and your joystick should be ready to use.

Flight Sim Screen Shots