Difference between revisions of "Sopwith F1 Camel"
(New page: {{underconstruction}} References: Great Fighters of the World by Key Publishing LTD 2009 Aircraft of World War 1 by Hippo Books 1965 The International Encyclopedia of Aviation by Octopus...) |
|||
| Line 4: | Line 4: | ||
Great Fighters of the World by Key Publishing LTD 2009 | Great Fighters of the World by Key Publishing LTD 2009 | ||
| + | |||
Aircraft of World War 1 by Hippo Books 1965 | Aircraft of World War 1 by Hippo Books 1965 | ||
| + | |||
The International Encyclopedia of Aviation by Octopus Books LTD 1977 | The International Encyclopedia of Aviation by Octopus Books LTD 1977 | ||
| + | |||
| + | |||
The Sopwith F.1 'Camel' was designed as a faster, more heavily armed and more manoeuvrable successor to the Pup. It was the first design to incorporate two machine guns mounted to fire through the arc of the propeller. The Sopwith designers placed all the heavy components (including the pilot) within the first 7 feet of the fuselage, close about the centre of gravity. This alone would have given the aircraft excellent manoeuvrability, but Camel pilots claimed an almost impossible agility due to the torque and gyroscopic effects of the rotary engine. Certainly those features were responsible to a large degree for the many accidents involving the F.1 which on the one hand finished the war with more credited 'kills' than any other type (1,294) but sadly also killed a similar number of Allied pilots in accidents, mostly during takeoff and landing. Certainly the design was superior to the Pup in terms of speed, agility and armament, but the price for these gains was a much less forgiving mount with a number of unpleasant suprises for the unwary pilot. | The Sopwith F.1 'Camel' was designed as a faster, more heavily armed and more manoeuvrable successor to the Pup. It was the first design to incorporate two machine guns mounted to fire through the arc of the propeller. The Sopwith designers placed all the heavy components (including the pilot) within the first 7 feet of the fuselage, close about the centre of gravity. This alone would have given the aircraft excellent manoeuvrability, but Camel pilots claimed an almost impossible agility due to the torque and gyroscopic effects of the rotary engine. Certainly those features were responsible to a large degree for the many accidents involving the F.1 which on the one hand finished the war with more credited 'kills' than any other type (1,294) but sadly also killed a similar number of Allied pilots in accidents, mostly during takeoff and landing. Certainly the design was superior to the Pup in terms of speed, agility and armament, but the price for these gains was a much less forgiving mount with a number of unpleasant suprises for the unwary pilot. | ||
| − | The twin .303 Vickers machine guns mounted side by side on the nose had a 'hump' fairing over the breeches, and this combined with the downward slope of the rear fuselage led quickly to the F.1's nickname 'Camel'. The nickname was never officially adopted but today anyone even slightly familiar with World War 1 aviation would likely recognise the squat machine as the Sopwith Camel. With a 28 foot wingspan and just 18 feet 6 inches long and 8 feet 6 inches high, the Camel was barely larger than the diminutive Fokker Dr1. It was initially intended to have dihedral on both upper and lower wings, but to ease production the upper wing was redesigned with no dihedral and the lower wing dihedral was doubled to compensate, adding yet more individuality to it's unique appearance. | + | The twin .303 Vickers machine guns mounted side by side on the nose had a 'hump' fairing over the breeches, and this combined with the downward slope of the rear fuselage led quickly to the F.1's nickname 'Camel'. The nickname was never officially adopted but today anyone even slightly familiar with World War 1 aviation would likely recognise the squat machine as the Sopwith Camel. With a 28 foot wingspan and just 18 feet 6 inches long and 8 feet 6 inches high, the Camel was barely larger than the diminutive Fokker Dr1. It was initially intended to have dihedral on both upper and lower wings, but to ease production the upper wing was redesigned with no dihedral and the lower wing dihedral was doubled to compensate, adding yet more individuality to it's unique appearance. At 1,453 pounds (all up weight) or 659 kg, the F.1 was little more substantial than many modern light sport aircraft, and perhaps less well powered considering the typical configuration of a 9 cylinder rotary Clerget engine of 130hp (96kW). But with the twin Vickers machine guns and the ability to carry four 20 pound Cooper bombs against ground targets this was indeed a dedicated and for the day, deadly weapon of war, in the right hands. |
Revision as of 08:23, 8 November 2010
References:
Great Fighters of the World by Key Publishing LTD 2009
Aircraft of World War 1 by Hippo Books 1965
The International Encyclopedia of Aviation by Octopus Books LTD 1977
The Sopwith F.1 'Camel' was designed as a faster, more heavily armed and more manoeuvrable successor to the Pup. It was the first design to incorporate two machine guns mounted to fire through the arc of the propeller. The Sopwith designers placed all the heavy components (including the pilot) within the first 7 feet of the fuselage, close about the centre of gravity. This alone would have given the aircraft excellent manoeuvrability, but Camel pilots claimed an almost impossible agility due to the torque and gyroscopic effects of the rotary engine. Certainly those features were responsible to a large degree for the many accidents involving the F.1 which on the one hand finished the war with more credited 'kills' than any other type (1,294) but sadly also killed a similar number of Allied pilots in accidents, mostly during takeoff and landing. Certainly the design was superior to the Pup in terms of speed, agility and armament, but the price for these gains was a much less forgiving mount with a number of unpleasant suprises for the unwary pilot.
The twin .303 Vickers machine guns mounted side by side on the nose had a 'hump' fairing over the breeches, and this combined with the downward slope of the rear fuselage led quickly to the F.1's nickname 'Camel'. The nickname was never officially adopted but today anyone even slightly familiar with World War 1 aviation would likely recognise the squat machine as the Sopwith Camel. With a 28 foot wingspan and just 18 feet 6 inches long and 8 feet 6 inches high, the Camel was barely larger than the diminutive Fokker Dr1. It was initially intended to have dihedral on both upper and lower wings, but to ease production the upper wing was redesigned with no dihedral and the lower wing dihedral was doubled to compensate, adding yet more individuality to it's unique appearance. At 1,453 pounds (all up weight) or 659 kg, the F.1 was little more substantial than many modern light sport aircraft, and perhaps less well powered considering the typical configuration of a 9 cylinder rotary Clerget engine of 130hp (96kW). But with the twin Vickers machine guns and the ability to carry four 20 pound Cooper bombs against ground targets this was indeed a dedicated and for the day, deadly weapon of war, in the right hands.