Difference between revisions of "Panther G"
(→Development) |
|||
| Line 8: | Line 8: | ||
|manufacturer =MAN AG | |manufacturer =MAN AG | ||
|crew =5 | |crew =5 | ||
| − | |width = | + | |width =3.27m |
| − | |length = | + | |length =8.66m |
| − | |height = | + | |height =2.97m |
|speed =29 mph | |speed =29 mph | ||
| − | |maingun =75 mm KwK | + | |maingun =75 mm KwK 42 L/70 (82 rounds) |
|options1 =HE (High Explosive) | |options1 =HE (High Explosive) | ||
|options2 =AP (Armor Pierceing) | |options2 =AP (Armor Pierceing) | ||
Revision as of 14:54, 20 December 2011
|
Aces High II Vehicle | |
| Panzer V G Panther | |
| Variant of | Panzer V |
|---|---|
| Type | Tank |
| Country of origin | Germany |
| Manufacturer | MAN AG |
| Crew | 5 |
| Dimensions | Width 3.27m Length 8.66m Height 2.97m |
| Max Speed | 29 mph |
| Aces High II Ordnance Options | |
| Primary Armament | 75 mm KwK 42 L/70 (82 rounds) |
| Options | HE (High Explosive) |
| AP (Armor Pierceing) | |
| Smoke | |
| Secondary Armament | 3x 7.9mm MG 34 (2950 rounds) |
| Aces High II Armor Thickness | |
| Turret Front | 100mm |
| Gun Mantlet | 100mm |
| Turret Sides and Rear | 45mm |
| Turret Top | 16mm |
| Hull Glacis | 80mm 55' |
| Hull Lower Front | 50mm |
| Hull Sides | 40mm |
| Hull Rear | 16mm |
| Hull Top | 40-16mm |
| Hull Bottom | 25mm |
| Aces High II Main Arenas | |
| Earliest MA | Late War |
| Typical perk cost | 15 (Late War) |
| ENY value | 12 (Late War) |
| Available on carrier | no |
| how to edit | |
Contents
The Panther G in World War II
Development
A new simplified hull design with the superstructure side made from a single plate was introduced on the Panther Ausf.G. The rear deck was also redesigned with a new cooling air intake and armored exhaust louvres. Also, the driver's and radio operator's hatches were hinged on the outer side, and the driver's visor was replaced by a pivoting traversable periscope. The main drive train and suspension components were kept unchanged from the Panther Ausf.A. The same turret design for the Panther Ausf.A was retained on the Panther Ausf.G. A Panther Ausf.G produced in April 1944 had the same turret as a Panther Ausf.A produced in the same month. Modifications introduced during the production run as the Panther Ausf.G included changing to the welding armor guards to protect the exhaust pipes, adding sheet metal shields around the exhaust pipes, welding Pilze sockets to the turret roof, fatening a rain guard over the driver's periscope, welding a debris guard over the gap behind the gun mantle, ceasing application of zimmerit anti-magnetic coating, mounting the FG 1250 infra-red searchlight and scope, changing to Flammvernichter (flame arresting) mufflers, deleting the rear shock absorbers, introducing the "chain" gun mantlet, mounting a tower over the left engine cooling fan for the Kampfraumheizung (crew compartment heater), and welding five loops for holding camouflage on each turret side.
About 2,950 Panther Ausf.G were produced by M.A.N., Daimler-Benz, and MNH in Fgst.Nr series 120301 to 130000 from March 1944 and continuing until the assembly plants were captured by the Allies in April 1945.
Unit Deployment
External Links
The Panther G in Aces High II
Panther G