Difference between revisions of "Carrier Task Groups"

From AHWiki
Jump to: navigation, search
(→‎Task Group Placement)
Line 53: Line 53:
 
'''Object Type''': Ship - Do Not Change
 
'''Object Type''': Ship - Do Not Change
  
−
'''Ownership''': Field checked
+
'''Field Owned''': Checked
  
 
'''Field''': The field number you selected earlier.
 
'''Field''': The field number you selected earlier.

Revision as of 12:11, 21 April 2008

Carrier Task Group Object Types

There is 1 Carrier Task Group type in Aces High.

Carrier Task Group
Carrier icon

Carrier Task Group
Group name: cvtg0

Task Group Placement

Click the Objects tab in the Editing Options Area to activate the Objects tool and put the Terrain Editor in object editing mode. When in object editing mode, clicking on the main editing window will produce a red “+” on the terrain which marks a spot for an object or object group to be placed.

All task groups must be attached to a port.

To add a task group to your terrain, activate Snap in the Terrain Window Options area. Also, activate the Grid in the same area. This ensures the object will be perfectly centered in the 1 mile grid.

Then left click on the center of the 1 mile grid where you want your Task Group object to be. Keep in mind that Carrier Task groups must be placed in an area of water on your terrain. Locate cvtg0 in the Shape Groups list on the Objects tab and click on it. Then click Add Shape/Group in the Objects tab.

When you click Add Shape/Group, the Carrier Task Group will be placed in the grid you selected and a window prompting you for a field number will appear.

Select Field Box

You can either type in a field number, or use the dropdown list and select the next new field number by scrolling down to the bottom of the list. You can also select the zone in the same manner.

Now that you're Task Group is in the water, you need to attach it to a port. In the Selection List on the Objects tab double click on the first ship listed (F##SHP000 where ## is the field number you selected).

Selection List


Setting Task Group Properties
Properties Box Position: For carrier task groups, this is informational only. Do not change.

Object Name: Do not change

Object Type: Ship - Do Not Change

Field Owned: Checked

Field: The field number you selected earlier.

Zone: Change to the correct zone if needed.

Can Collide: Checked

Set to Terrain Alt: Checked

Is Zone Master: Should be grayed out and unselectable

ID: Do not change.

Group ID: Do not change

Object Data: Should be the port field number that this task group belongs to. You can either use the dropdown list and select the port field number, or manually type the number in the box.

Down Time: Do not change

Point Value: Do not change

Hardness: Do not change

After setting all of the properties click OK.

Setting a Default Route for the Task Group

Every task group must have a default (starting) route assigned to it.